See this topic for some videos:
viewtopic.php?f=2&t=24868Watch the videos and read beer blogs. I suggest you become a beer nerd BEFORE starting to brew your own, as you'll have a lot more appreciation for it then.
Once you're ready, you need to get yourself a starter-kit. Most everyone sells the same stuff, more-or-less, so you don't really need to worry about where it comes from.
Austin Homebrew rules, and Northern Brewer is a pretty decent resource, too. I don't know if Austin Homebrew ships to Canada, but Northern Brewer might.
There's a homebrew shop in Montreal:
http://www.choppeabarrock.com/You should call 'em up and make sure they still exist, and then go in and talk to them. Tell them you're interested in doing it and whatnot. They'll answer any questions you've got. Don't ask 'em questions over the phone unless you're
brewing a beer and need help in the middle of the process, though. Most folks hate getting a 10-15 minute phone interview with someone who they might not ever see in their store.
There are three methods to
brewing beer: extract, mini-mash (some folks call it partial-mash), and all-grain. The different processes produce a similar end-result, but let me go over the pros and cons of each.
Extract: all of your fermentable sugars come from either powdered or liquid malt extract. Extract normally comes in jars or cans, and is available in a handful of different varieties. You can even mix different types together and come up with something interesting.
Extract Pros:
- It's easy. Your first couple beers should probably be extract beers, unless you've got a pseudo-experienced friend helping you out.
- It's faster than the other two methods.
Extract Cons:
- It's hard to come up with something 'unique' because all of the malt you're using is normally pre-packaged.
- Ingredients are generally more expensive than the other two methods.
Mini-mash: about half of your fermentable sugars come from either liquid or dry malt extract, and half come from actual malted barley (grains that you put in a big mesh bag and steep). The specialty grains are what adds the time to mini-mash. Basically, you have to steep the grains in hot water for an hour before you add your malt extract. That's what "mashing" is.
Mini-Mash Pros:
- It's cheaper than extract
brewing.
- IMO, the beer tastes better than extract.
- More varieties: the specialty grains allow you to get quite ridiculous with your malt combinations.
- Quicker than all-grain, and no additional equipment is required; you can do it with the same equipment you use for an extract brew.
- Most breweries use the mini-mash method because it's a happy balance between price vs time.
Cons:
- More difficult than extract
brewing, in that there's a higher margin for error.
- Takes about an hour longer than extract
brewing.
All Grain: all of your fermentable sugars are malted barley (or some other grain, depending on what you're
brewing). You can literally have dozens of different malts and roasts in the same beer, giving you the ability to do some crazy stuff. It takes a little bit longer than mini-mash, and requires extra equipment. You have to have a lauter/mash tun (it can easily be made -- google it) in which your grains steep and lauter. Oh yeah. Lauter means "rinse residual sugars off of your mashed grains with warm water".
All-grain Pros:
- It's the purist method.
- Cheaper than both extract and mini-mash.
- The possibilities are endless.
- Great tasting beer. 75% of craft breweries use this method because of it.
All-grain Cons:
- More difficult than mini-mash.
- Extra time.
- Extra equipment.
There, I hope that helps.
_________________
I hate to advocate drugs, alcohol, violence, or insanity to anyone, but they've always worked for me.
-- Hunter S Thompson